KiwiGrip is a revolutionary, durable, non-skid coating that spreads quickly and easily with our proprietary roller, offering a beautiful, high traction surface. By varying the application technique, the texture can be adjusted from a rolled "pleasure boat" texture to an industrial aggressive "work boat" texture. As a homogeneous material KiwiGrip doesn't suffer from the problems encountered with products filled with sand, walnut shells, beads, rubber fleck, or other fillers. Coatings with fillers tend to wear through, and the fillers fall out leaving an unsafe deck that's hard to clean and even harder to re-coat.
A 1 liter can of KiwiGrip will cover about 20 square feet. A 4 liter can will cover about 80 square feet.
Loaded with a UV stabilizer for consistent color. Available in four standard colors. Note that the RAL codes are approximate.
- White – RAL 9003
- Grey – RAL 7047
- Cream – RAL 1015
- Black – RAL 9004
- Blue – No RAL match
KiwiGrip is a very hard acrylic polymer providing a durable, homogeneous, elastic surface. KiwiGrip will not wear through and expose filler materials.
Apply over wood, fiberglass, epoxy, concrete or metal and dial in the perfect texture for your application by varying your technique.
No volatile solvents, very low VOC. Cleans up with soap and water.
New and improved packaging!
- Shake in pouch, squeeze, spread and roll to desired texture.
- Purge air from pouch and reseal for easy, safe storage.
- No risk of product loss in transit due to dented cans.
- Less plastic per liter than previous can packaging with roller cover.
When recoating KiwiGrip make sure to test in an inconspicuous area to ensure color match before committing to the entire project.