Sonihull Mono
The Sonihull Mono is a ultrasonic antifouling system for yachts up to 32 feet in length.
- Each transducer is powered by a dedicated signal generator, offering a continual signal to all transducers.
- Transducers and their cable connections are rated for submerged operations.
- Transducers have no exposed metal.
- AC/DC power option defaulting to AC.
- Automatic shut off in Low Voltage DC power situation to protect batteries.
- Remote system status monitor.
- Manufactured "In House" for the best possible quality control.
- Virtually undetectable to the human ear with no need for a "sleep switch".
Sonihull Ulstrasonic Antifouling System offers superior performance and reliability with a combination of features not offered by any competitor. This environmentally friendly system does not introduce metals or chemicals to the environment. You'll encounter less frequent haul outs and cleaning thus making this system very cost effective. Increase efficiency by saving fuel when motoring and faster speeds when sailing. Easy installation with no hull penetration required. Automatic voltage selection between AC and DC, defaults to AC when short power connected.
Protect your hulls, sea chests, pipework, propeller shafts, stern drives, water jets, rudders and trim tabs from fouling.
Works great on GRP, composite, aluminum, steel, carbon or kevlar.
Which Sonihull System?
Not sure if the Sonihull Mono is the correct system for your boat? Refer to our Sonihull sizing chart or speak to our experts.
Installation
The Sonihull Mono is very easy to install as there are no through hulls. Read our installation instructions for complete step by step guide on how to install a Sonihull Mono system.
Controll Box Overview
| LED | Color | Normal Status | Fault Status | Comments |
|---|---|---|---|---|
| Power On | Red | ON | Flashing | Flashing is normal due to incorrectly seated transducers. |
| Output 1 | Green | ON | OFF | OFF when not connected or in fault. |
| Output 2 | Green | ON | OFF | OFF when not connected or in fault. |
| Status OK | Green | ON | OFF | Fault indication, check power and transducers. |
Transducer Overview
Transducer Positioning
Placement of the Sonihull transducers is extremely important, the better the placement the better the results. Check out our transducer placement diagram to see where to place the transducers, or talk to one of our experts.
Saves Money
A clean hull and drivetrain can reduce fuel bills by 20% - 30%! Reduces maintenance costs and expensive haul outs.
Better Performance
Reduces drag and vibration thus increasing performance.
Eco-Friendly
Tests have demonstrated that electronic antifouling products have no adverse effect to fish and marine mammals. The ultrasonic frequencies stay very close to the hull structure and it is demonstrable that the signal does not stray into open water.
Technical Specifications
| Power Supply Approvals | UL and CE |
| Voltage | 100 - 240v AC 50/60Hz, 12-24v DC |
| Power | 3.6w |
| Pulse Frequency | 19.5 - 55kHz |
| Control Box Rating | IP65 |
| Transducer Rating | IP68 |
| Transducer Cable Length | 18 feet |
| Weight | 9 lbs. |
| Dimensions | 7" x 5" x 3" |
| Warranty | 2 years |
Includes
Here's what's included with the Sonihull Mono system.
- 1 control unit
- 1 transducer
- 1 mains cable
- 1 marine grade epoxy
- 1 jar of Vaseline
- Installation instruction booklet
Accessories
There are many accessories for the Sonihull Mono to fully protect your vessel from fouling.
Stern Drive Adaptor
Protects your stern drive & saildrive
Sonishaft
Protect your prop shaft & propellers
Pipe Adaptor
Protection for 2" - 10" piping
Extension Cable
16.4 feet (5 meter) cable