R&D Marine Engine Mounts

Published: 11/25/14 at 03:21pm
R&D Marine Engine Mounts

The R&D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust, yet soft enough to isolate drivetrain vibrations from the hull. To help increase the longevity of the mounts, all steel parts are zinc plated and passivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum based products. R&D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate in the ease of installation the mounts are height adjusting and the mounting holes in the base of the mount are slotted to assist in alignment of the drivetrain.

Click here to use our R&D Marine Engine Mount calculator to find the right engine mount for your application.

R&D Marine Engine Mounts are:
- Built to withstand a roll-over test
- Preloaded to isolate engine vibration from transferring through the hull
- An upgrade from the factory mounts at a much more attractive price
- Covered by a 1 year limited warranty

Kit Now Available for most Yanmar Applications

Alt Text Here...

Duplicates the factory original hole pattern, height, & stud diameter for the Yanmar 1GM, 2GM, 3GM, 3YM, 3HM, and 3JH series engines. Each mount has a load rating between 50-175 lbs. This kit contains four engine mounts.

Please contact your local distributor or click here to order direct from PYI

Attention Amazon Prime Members: The 800YMKIT1 is now available on Amazon Prime. Take advantage of FREE two day shipping when you order from Amazon! Click here to be directed to the Amazon Listing