Max Prop
Automatic Feathering Propeller

Accessories

As part of the maintenance of your Max-Prop propeller, you will need to grease it once every 2 years as well as replace the zinc parts every year.

Velox Plus Antifouling Propeller Paint

Velox Plus is an antifouling paint developed specifically to protect propellers, stern drives, shafts, outdrives, struts, jet pumps and other metallic parts immersed in the water.

 


Grease Kit

The Max Prop needs to be regreased a minimum of once every two years. We recommend Lubraplate "130 AA" grease.

 

Order, Click Here

Zinc

Make sure that you always keep the zinc anodes in good condition. They must be replaced at least once a year. The propeller must be protected by a lot of zinc.

Order, Click Here


Screw Kit

Replacement screw sets.

Order, Click Here




Grouper Zinc

This Zinc is made to be attached to the grounding system and hung over the side for additional cathodic protection of your boat and propeller

Order, Click Here


Saildrive Zinc

Sacrificial zinc anode for a Max-Prop installed on a SailDrive unit.

Order, Click Here